Gyrocompass · Position & Heading
SAM Electronics NAVIGAT X FOG is listed in the source as a marine Gyrocompass within the Position & Heading group. Equipment of this type is typically installed at the bridge or steering-control system, with any remote sensors installed at locations appropriate to heading, position or motion measurement. Its primary duty is providing or controlling the vessel data and steering function associated with the Gyrocompass, and it uses sensor signals, control electronics, ship power and steering or bridge interfaces to produce a stable navigation or heading-control output. Neighboring variants can differ in rating, size, interface, approval basis or arrangement, so the complete model designation and actual nameplate data are important for identification. It normally interfaces with steering control, heading sensors, GNSS or speed inputs where applicable, bridge alarms, data networks and ship power. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, SAM Electronics first.
What our service work and the manufacturer documentation say about keeping this model running.
Compare indications with independent references, inspect sensors and cable routes, verify power supplies and alarms, and test changeover or backup arrangements where fitted. For heading-control equipment, examine the connected steering feedback and response as well as the bridge controller. Refer to manufacturer documentation for exact calibration and acceptance values.
Useful spares include maker-approved fuses, interface modules, power-supply parts, display or control modules, connectors and sensor accessories appropriate to the installed system.
Free of charge — we forward your request to qualified suppliers for SAM Electronics equipment from our network of over 114,000 maritime companies.
Tell us what you need for this SAM Electronics NAVIGAT X FOG — a part, a service call, a second opinion. Are you SAM Electronics? Claim this brand page.
Service engineer? Write the day report for this NAVIGAT X FOG in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.