"> Pri-Safety Marine Pri-Safety Marine Foam 12kg
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Pri-Safety Marine in the Maritime Network Find suppliers →
Pri-Safety Marine

Pri-Safety Marine Foam 12kg

Pri-Safety Marine Pri-Safety Marine Foam 12kg is listed as a Foam Extinguisher within the Portable Fire Extinguishers category. It is typically installed at designated accessible positions in accommodation, machinery, galley, deck or cargo areas according to the vessel’s fire-control plan. Its engineering role is to provide immediate first-response firefighting using the extinguishing medium identified for the unit. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

capacity kg 12
fire class A,B
marine approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Loss of charge or propellant can leave the extinguisher under-ready, found by inspection of pressure/weight status as applicable
Corrosion or mechanical damage to the cylinder can compromise integrity, seen as rusting, dents or damaged fittings
Blocked hose, nozzle or discharge path can prevent effective application, found during inspection or servicing
Damaged safety pin, seal, valve or trigger mechanism can prevent reliable activation
Expired inspection or degraded extinguishing medium can render the unit unsuitable for service

Service & Maintenance

Inspect accessibility, markings, safety seal, hose/nozzle, cylinder condition and service status. Verify the extinguisher type matches the assigned hazard and the fire-control plan. Charge quantities, pressure limits and overhaul criteria must follow approved manufacturer and statutory servicing documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Onboard spares are normally limited to approved brackets, pins/seals, hoses or nozzles where permitted; recharge and internal servicing should follow authorized procedures.
Equipment Model #130461 · ✓ still in production