"> Palfinger Marine GES 40
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 10 verified suppliers & service companies for Palfinger Marine in the Maritime Network Find suppliers →
Palfinger Marine

GES 40

The Palfinger Marine GES 40 is a SOLAS‑approved free‑fall davit system designed to launch a 9.6 m lifeboat carrying up to 40 persons in an emergency. The supplied category identifies the equipment as Raft), and it is normally installed at an assigned embarkation and launching station with its approved davit, release gear or free-fall arrangement. In that listed role, its primary purpose is to provide evacuation or rescue capability during abandonment and emergency response. Totally enclosed, free-fall and rescue-boat designs differ in launching arrangement and operating role, while exact capacity, speed and release details remain those in the approved documentation. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Palfinger Marine GES 40
40 persons
Capacity
Crew Evacuation / Safety
Medium

Components & Design

Component data being added…

Technical Data

persons 40
length m 9.6
type freefall
solas True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Engine, battery or fuel-system deterioration causes difficult starting or failure to run during drills
Release-hook, linkage or interlock wear causes stiff operation, incorrect indication or unsafe release behaviour
Hull, canopy, window or seal damage causes water ingress or reduced weathertight integrity
Steering or propulsion faults cause poor manoeuvrability, abnormal vibration or loss of thrust
Inventory, securing or communication-equipment deficiencies are noticed during drills or statutory inspection

Service & Maintenance

Inspect hull, canopy, drains, engine, batteries, fuel, steering, propulsion, release gear, hooks, seating and required equipment. Run the engine and test steering and release functions strictly under approved procedures. Review maintenance and statutory service records. Refer to manufacturer and SOLAS-approved documentation for the exact figure for load, release and maintenance criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry engine filters and belts as applicable, battery support items, fuel-system consumables, propulsion service items, approved release-gear spares where permitted, drain plugs, lights and inventory consumables.
Equipment Model #1304 · ✓ still in production