"> Survitec Survitec CO2 5kg
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 6 verified suppliers & service companies for Survitec in the Maritime Network Find suppliers →
Survitec

Survitec CO2 5kg

Survitec Survitec CO2 5kg is listed as a portable marine fire extinguisher in the Portable Fire Extinguishers / CO2 Extinguisher category. Equipment of this class is typically installed at marked and readily accessible fire stations near the hazards it is intended to protect. Its shipboard purpose is to provide immediate first-response firefighting using the extinguishing medium specified for the protected fire risk. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. No additional verified rating, capacity, weight, dimension, or other model-specific figure is supplied in the structured source data. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.

Components & Design

Component data being added…

Technical Data

capacity kg 5
fire class B,C
marine approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Loss of agent or propellant through valve, hose, seal, or cylinder leakage causes low weight or pressure indication and reduced discharge capability
Blocked nozzle, hose, or discharge tube from contamination or damage prevents effective agent flow
Corrosion, dents, heat damage, or mechanical impact weakens the cylinder and can make it unsafe for service
Tampered pin, damaged seal, seized valve, or missing operating instructions delay or prevent activation
Expired service status or degraded extinguishing agent is identified during inspection and can reduce reliability

Service & Maintenance

Check location, accessibility, signage, cylinder and hose condition, safety pin and seal, pressure or weight indication as applicable, service tag, and evidence of corrosion or damage. Servicing, hydrostatic testing, agent replacement, and rejection criteria must follow statutory and manufacturer requirements.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Onboard spares normally include approved mounting brackets, pins and seals, hoses or nozzles where serviceable, and replacement extinguishers of the correct approved type; internal servicing is generally handled by an authorized service provider.
Equipment Model #130201 · ✓ still in production