Water Mist System (Hi-Fog) · Fixed Fire Suppression
Danfoss Semco SEM-SAFE LoPre is listed in the source as a marine Water Mist System (Hi-Fog) within the Fixed Fire Suppression group. Equipment of this type is typically installed at the protected space, safety station or control panel location required by the vessel's fire and gas safety arrangement. Its primary duty is detection, alarm, breathing protection or fire-suppression duty associated with the Water Mist System (Hi-Fog), and it depends on the detector, cylinder or extinguishing medium, control hardware, distribution components and safety interfaces remaining ready for immediate use. Neighboring variants can differ in rating, size, interface, approval basis or arrangement, so the complete model designation and actual nameplate data are important for identification. It normally interfaces with fire and gas alarm panels, release circuits, piping or nozzles where fitted, power supplies, ventilation shutdowns and other safety interlocks as applicable. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Danfoss Semco first.
What our service work and the manufacturer documentation say about keeping this model running.
Check physical condition, accessibility, labels and service status, then verify approved tests of detectors, alarms, release circuits or breathing components as applicable. Inspect cylinders, hoses, nozzles, masks, wiring and interlocks without discharging or altering safety systems outside the approved procedure. Use maker, class and statutory documentation for exact inspection and acceptance criteria.
Hold only approved safety-system spares such as detector heads, filters or sensor caps, fuses, batteries where user-replaceable, seals, hoses, masks, nozzles and control modules according to the vessel's certified arrangement.
Free of charge — we forward your request to qualified suppliers for Danfoss Semco equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Danfoss Semco SEM-SAFE LoPre — a part, a service call, a second opinion. Are you Danfoss Semco? Claim this brand page.
Service engineer? Write the day report for this SEM-SAFE LoPre in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.