EPIRB (406 MHz) · EPIRB / SART
The Furuno EPIRB ELT-200 is a 406 MHz emergency position-indicating radio beacon. It is normally installed externally near the bridge or survival-craft area in a manual or float-free mounting. It is designed for satellite distress alerting after abandonment or serious casualty. The operating principle relies on transmission of a registered distress identity and, where fitted, position/homing information. Compared with neighbouring models, the relevant differences are Category I/II, float-free/manual mounting, GNSS and homing features; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on registration, battery, self-test, casing/antenna, bracket and hydrostatic release where fitted. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.
What our service work and the manufacturer documentation say about keeping this model running.
Check battery/service expiry, approved self-test, casing, antenna, activation arrangement and identification/registration. Verify mounting, lanyard, pole or hydrostatic-release arrangement where applicable and ensure deployment is unobstructed. Do not generate a live distress transmission during routine inspection unless an authorized test procedure specifically requires it.
Internal repair is normally an authorized-service task. Carry only manufacturer-approved external mounting, lanyard, bracket, pole or hydrostatic-release parts where shipboard replacement is permitted, and schedule battery/service replacement before expiry.
Free of charge — send us your request for Furuno equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Furuno first.
Tell us what you need for this Furuno EPIRB ELT-200 — a part, a service call, a second opinion. Are you Furuno? Claim this brand page.
Service engineer? Write the day report for this EPIRB ELT-200 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.