"> DSB Marine DSB ORR 20P
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
DSB Marine

DSB ORR 20P

The DSB Marine DSB ORR 20P is an open reversible liferaft. It is normally installed at an accessible deck stowage position with an approved deployment arrangement. It is designed for rapid collective flotation in vessel types/areas where open reversible rafts are approved. The operating principle relies on reversible inflatable buoyancy structure provides usable flotation whichever side lands uppermost. The supplied entry gives no additional verified capacity, pressure, power or dimensional figure for this model. Compared with neighbouring models, the relevant differences are certified capacity, pack, dimensions, approval and deployment arrangement; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on pack/container, painter, stowage, lashings/release, service date and clear launch access. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

capacity persons 20

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Engine or propulsion failure where fitted caused by battery, fuel or mechanical faults, noticed during drills
Release, hook or launching-interface fault caused by corrosion, wear or incorrect adjustment, noticed as stiff operation or failed approved test
Hull, enclosure or raft-pack damage caused by weather, impact or poor stowage, noticed as cracks, leakage, deformation or damaged container
Steering, restraint or securing fault caused by wear/damage, noticed during drill or inspection
Missing, expired or overdue survival equipment/service caused by maintenance-control failure, noticed from inventory or service labels

Service & Maintenance

Inspect external structure/container, stowage and securing, engine/steering where fitted, hooks/release/launch interfaces and all accessible safety equipment. Verify service dates, markings, approved occupancy/capacity and compatibility with the assigned launching appliance. Internal liferaft servicing and critical release-gear work should be performed only under approved procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry engine service parts for powered craft, approved batteries/charging items, steering/control components, seals and manufacturer-approved hook/release parts where onboard replacement is permitted. For liferafts, keep only approved external release/lashing components and arrange authorized service/exchange units before due dates.
Equipment Model #129616 · ✓ still in production