OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Safety & LSA› Lifeboats› Totally Enclosed Lifeboat (TELB)› Fassmer SEL-20P

SEL-20P

Totally Enclosed Lifeboat (TELB) · Lifeboats

Class-certified type (DNV register) · technical data sheet not yet verified

The Fassmer SEL-20P is a totally enclosed lifeboat. It is normally installed at an abandonment station in davits or another approved launching arrangement. It is designed for collective abandonment with enclosed protection for assigned occupants. The operating principle relies on rigid enclosed survival craft with propulsion, steering, seating/restraints and release gear. Compared with neighbouring models, the relevant differences are certified capacity, dimensions, engine, seating and launching arrangement; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on hull/enclosure, engine, battery, steering, hooks/release gear, restraints, equipment and davits. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Capacity (persons)20
SOLAS ApprovedYes
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect external structure/container, stowage and securing, engine/steering where fitted, hooks/release/launch interfaces and all accessible safety equipment. Verify service dates, markings, approved occupancy/capacity and compatibility with the assigned launching appliance. Internal liferaft servicing and critical release-gear work should be performed only under approved procedures.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry engine service parts for powered craft, approved batteries/charging items, steering/control components, seals and manufacturer-approved hook/release parts where onboard replacement is permitted. For liferafts, keep only approved external release/lashing components and arrange authorized service/exchange units before due dates.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Fassmer equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Totally Enclosed Lifeboat (TELB).

Other models of the same equipment type, Fassmer first.

By manufacturer NorsafeSCHAT-HardingFassmerJiangyin NeptuneShigi ShipbuildingPalfinger Marine SafetyHateckeVerhoefMisea MachineryPALFINGERNingbo New Marine Lifesaving Equipment Co., Ltd.VIKING Life-Saving EquipmentAGI GROUPFr. FassmerJiangsu JiaoyanAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Fassmer models More like Fassmer SEL-20P
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this Fassmer SEL-20P — a part, a service call, a second opinion. Are you Fassmer? Claim this brand page.

Service engineer? Write the day report for this SEL-20P in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.