OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Deck› Towing Equipment› Towing Winch› Data Marine DMM-120

DMM-120

Towing Winch · Towing Equipment

Class-certified type (DNV register) · technical data sheet not yet verified

Data Marine DMM-120 is a towing winch. It is installed on a reinforced working deck, typically aft or forward on a tug or towing vessel, with a clear towline lead to the towing point or fairlead. Its purpose is to control and transmit towing loads while allowing the crew to pay out, recover, secure or release the towline according to the equipment type. Towing machinery is integrated with foundations, brakes, drives, controls and line-handling components designed for dynamic tow loads. The exact model designation identifies line capacity, drive configuration and load rating; these values must be taken from approved manufacturer and vessel documentation.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Line Pull (t)120
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect brakes, clutches, drums, fairleads, sheaves, drive components, foundations and guards before towing operations. Check towline spooling and contact surfaces and remove burrs or damage that could harm the line. Function-test local and remote controls, emergency release and load-monitoring features where fitted using the approved procedure. Inspect hydraulic hoses and valves or electrical equipment according to drive type. Examine foundations and high-load welds for corrosion or cracking and keep personnel clear of loaded-line danger zones. Refer to manufacturer and class documentation for exact brake settings, load tests, inspection intervals and wear limits.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Keep brake service parts, hydraulic seals or hose consumables where applicable, control switches, sensors, bearings and manufacturer-recommended line-handling wear parts. Critical release components must match the approved towing system. Heavy drums, gears and structural parts are normally managed as strategic spares.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Data Marine equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Towing Winch.

Other models of the same equipment type, Data Marine first.

By manufacturer Markey MachineryRolls-Royce / KongsbergIbercisaKarmøy WinchRapp MarineData MarineTowimorASL NorwayDMT Marine Equipment SAMacGregorJonRie InterTechKongsbergMarkeyMarkey MachineIBERCISA Deck MachineryAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Data Marine models More like DMM-120
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this Data Marine DMM-120 — a part, a service call, a second opinion. Are you Data Marine? Claim this brand page.

Service engineer? Write the day report for this DMM-120 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.