Intergard 269

Epoxy Primer · Paint & Coating Systems

Class-certified type (DNV register) · technical data sheet not yet verified‌⁠⁠‌‌‍⁠⁠⁠‍‌⁠⁠‌‌⁠

International Paint / AkzoNobel Intergard 269 is a epoxy primer. It is normally installed or arranged in the specified hull, tank, deck or machinery surface. Its purpose is to protect the substrate against corrosion, fouling, chemicals, weather, slip or fire exposure. The equipment is based on coating layers whose performance depends on surface preparation, mixing, application and curing. The exact model designation distinguishes the installed configuration from neighboring variants in the same category; refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Working Pot Life17 hours 10°C (50°F)

Part B (Curing Agent)EGA089

Volume Solids47% ±2% (ISO 3233:1998)

Flash Point (Typical)Part A 26°C; Part B 25°C; Mixed 26°C

Unit Size20 lt

Unit Weight32.9 Kg

Shelf Life12 months minimum at 25°C

TypeEpoxy Primer

Dft (µm)150

Manufacturer documentation

Images from manufacturer documentation.

Photos, drawings and page previews from this model’s datasheet or catalog.

Intergard 269 is an epoxy coating designed for use on a variety of surfaces.

Applications

Blast holding primer
Tank lining holding primer

Source: AkzoNobel Intergard 269 datasheet, p. 3

Features

Suitable for steel, stainless steel and galvanised steel
Over-application can result in a glossy surface
Cures adequately above 5°C (41°F)
Suitable for use in a marine environment

Source: AkzoNobel Intergard 269 datasheet, p. 3

Standards

SSPC-SP1
SSPC-SP10
SSPC-SP6
ISO 8501-1:2007

Drawing · 36e605606a79_S2-3 · S. 2

Drawing · 2e689862ad6b_S1-4 · S. 2

Drawing · 2e689862ad6b_S1-4 · S. 3

Page preview · 2e689862ad6b_S1-4 · S. 1

Page preview · 2e689862ad6b_S1-4 · S. 4

Page preview · 99c190833a8b_S1-4 · S. 1

Page preview · 99c190833a8b_S1-4 · S. 4

Source: AkzoNobel Intergard 269 datasheet, p. 2

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect coated surfaces for blistering, rusting, cracking, peeling, mechanical damage and edge breakdown. Identify and remove the cause of moisture, contamination or chemical attack before local repair. Prepare the substrate and apply compatible repair coats according to the approved coating specification. Maintain batch, mixing, curing and environmental records where required by the vessel coating plan. Pay particular attention to welds, edges, drains and high-abrasion zones. Refer to the manufacturer documentation for the exact figure for surface preparation, dry-film thickness, curing and overcoating requirements.

Inspection

Common failures & inspection points

Blistering caused by moisture, osmotic contamination or poor surface preparation, resulting in raised bubbles and localized coating loss
Delamination caused by inadequate surface preparation, contamination or incompatible overcoating, resulting in peeling or loss of adhesion
Underfilm corrosion caused by coating damage, holidays or poor edge coverage, resulting in rust staining and progressive coating breakdown
Cracking or embrittlement caused by excessive film build, aging or substrate movement, resulting in visible cracks and loss of barrier protection
Abrasion, impact or chemical attack caused by service exposure, resulting in worn areas, discoloration or exposed substrate

Spares

Replacement Parts

Spare parts notes

Keep compatible primer, intermediate and topcoat materials required by the vessel coating scheme together with approved thinners, repair materials and application consumables. Respect shelf life and storage conditions and do not substitute a different coating chemistry without compatibility checks.

Need this part?

Request a quote for this model.

Free of charge — send us your request for International Paint / AkzoNobel equipment. Our team checks it and replies by e-mail.

More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this International Paint / AkzoNobel Intergard 269 — a part, a service call, a second opinion. Are you International Paint / AkzoNobel? Claim this brand page.

Request a part for this model Request service

Service engineer? Write the day report for this Intergard 269 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.

Browse by ship area

Sourcing desk

Four groups, one case file

Get started

Get service

Supplier network

Plans

Technical guides

Maritime Signal

OceanSphere Additive

OceanForge

OceanSphere Fabrication

AI knowledge on board, offline