DMC-MW-200kN

DMC Marine DMC-MW-200kN is listed in the source as a marine Mooring Winch within the Anchor & Mooring Equipment group. Equipment of this type is typically installed on deck or at the vessel's working, mooring, launching or cargo-access area, with foundations and machinery integrated into the ship structure. Its primary duty is the lifting, handling, mooring, towing or access duty associated with the Mooring Winch, and it combines the drive system, brakes or holding devices, mechanical transmission, structural components and local or remote controls to move and secure the intended load. Neighboring variants can differ in rating, size, interface, approval basis or arrangement, so the complete model designation and actual nameplate data are important for identification. It normally interfaces with hydraulic or electrical power as fitted, local and remote controls, limit or safety devices, alarms and the vessel's supporting structure. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.