OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Navigation› Navigation & Bridge Equipment› Weather Station / Anemometer› R.M. Young Heavy-Duty Wind 05305

Heavy-Duty Wind 05305

Weather Station / Anemometer · Navigation & Bridge Equipment

Class-certified type (DNV register) · technical data sheet not yet verified

R.M. Young Heavy-Duty Wind 05305 is a marine weather station or anemometer. It is installed on the bridge and at the associated antenna, transducer, camera or sensor location, with data distributed to connected ship systems as required. Its purpose is to provide wind or weather-related measurements to bridge personnel and connected systems. The exact sensor set, recording functions, data interfaces, approval status and redundancy depend on the installed model. The exact model designation distinguishes sensing, recording or communication capability from neighboring bridge equipment; refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

TypeAnemometer
Marine gradeYes
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect sensors, antennas, transducers, cameras, cabling, power supplies and network interfaces applicable to the installed equipment. Compare displayed information with independent references where possible and investigate recurring alarms or missing channels. Verify required outputs to other bridge systems and preserve configuration before approved software or hardware maintenance. Clean exposed sensors and optical surfaces without damaging coatings or seals. Check backup power or recording arrangements where applicable. Refer to the manufacturer documentation for the exact figure for test, calibration, update and recovery procedures.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Keep fuses, selected power-supply and interface modules, cables or connectors, storage media where applicable and manufacturer-recommended sensor or electronic spares. Replacement core units must remain compatible with the approved bridge installation. Preserve configuration and recorded setup data.

Need this part?

Request a quote for this model.

Free of charge — send us your request for R.M. Young equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Weather Station / Anemometer.

Other models of the same equipment type, R.M. Young first.

By manufacturer R.M. YoungVaisalaObservator InstrumentsGill InstrumentsBiralFT TechnologiesThies ClimaLufftLCJ CapteursTokyo KeikiDeuta-WerkeFurunoNSRAlphatronObservatorAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All R.M. Young models More like Heavy-Duty Wind 05305
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this R.M. Young Heavy-Duty Wind 05305 — a part, a service call, a second opinion. Are you R.M. Young? Claim this brand page.

Service engineer? Write the day report for this Heavy-Duty Wind 05305 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.