"> Perko Marine Fig 170 Masthead
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 2 verified suppliers & service companies for Perko Marine in the Maritime Network Find suppliers →
Perko Marine

Fig 170 Masthead

Perko Marine Fig 170 Masthead is listed in this library as a marine visual-signalling or navigation-light unit in the Signaling & Visual / Navigation Light category. Equipment of this class is typically installed on the mast, superstructure, bridge wings, deck edges, or other prescribed external location according to its signal function. Its shipboard purpose is to provide the required visual indication of vessel status, aspect, operation, or warning to other vessels and personnel. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. No additional verified rating, capacity, weight, dimension, or operating limit is provided in the source entry. Where adjacent models in the same product family differ in rating, size, materials, control options, certification, or accessories, refer to the manufacturer documentation for the exact model-specific differences.

Components & Design

Component data being added…

Technical Data

colreg compliant True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Lamp, LED module, or driver failure caused by age, heat, or electrical faults results in loss of light or a lamp-failure alarm
Corroded terminals, cable glands, or connectors from weather exposure cause intermittent operation or high-resistance heating
Water ingress through damaged seals or lenses causes condensation, corrosion, reduced intensity, or electrical faults
Incorrect alignment, damaged lens, or obstructed sector can alter the visible arc or reduce effectiveness
Supply, monitoring relay, breaker, or control-panel fault can prevent switching or produce a false lamp-failure indication

Service & Maintenance

Check operation from normal and emergency supplies where applicable, lens and housing condition, watertightness, mounting and alignment, unobstructed sectors, cable glands, monitoring alarms, and local/remote switching. Replacement light sources and sector requirements must match approved documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry approved lamps or LED/driver modules where replaceable, fuses, seals, cable glands, terminal items, and critical monitoring relays or control components for the installed system.
Equipment Model #127403 · ✓ still in production