OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Navigation› Signaling & Visual› Navigation Light› Hella Marine NaviLED 360 Stern

NaviLED 360 Stern

Navigation Light · Signaling & Visual

Class-certified type (DNV register) · technical data sheet not yet verified

Hella Marine NaviLED 360 Stern is listed in the source as a marine Navigation Light within the Signaling & Visual group. Equipment of this type is typically installed at the mast, bridge wing, deck or signaling station where the required light or visual signal has an unobstructed field of view. Its primary duty is visual navigation or signaling duty associated with the Navigation Light, and it depends on the light source, optical housing, power supply, mounting alignment and control or monitoring circuit remaining serviceable. Neighboring variants can differ in rating, size, interface, approval basis or arrangement, so the complete model designation and actual nameplate data are important for identification. It normally interfaces with navigation-light panels or local controls, ship power, cabling, mounting structures and alarm monitoring where fitted. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Every value below comes from the manufacturer datasheet or class-society record on file for this model.

LEDYes
Ingress Protection (IP)IP67
Related models

Also in Navigation Light.

Other models of the same equipment type, Hella Marine first.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Inspect lens condition, seals, mounting, sector or aiming arrangement, cable glands and corrosion. Test normal and backup supply or alarm monitoring according to the vessel's approved procedure. Refer to manufacturer and statutory documentation for exact luminous, range and sector requirements.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry approved replacement light modules or lamps where applicable, seals, fuses, connectors, control relays and mounting hardware matching the certified installation.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for Hella Marine equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMIGS-HydroAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Hella Marine models More like NaviLED 360 Stern
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this Hella Marine NaviLED 360 Stern — a part, a service call, a second opinion. Are you Hella Marine? Claim this brand page.

Service engineer? Write the day report for this NaviLED 360 Stern in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.