GPS Receiver · Position & Heading
Simrad VECTOR V114 is identified in the source list as a gps receiver. It is installed on the bridge and/or at the associated sensor location, with outputs distributed to other navigation equipment as required. Its purpose is to provide the vessel navigation parameter indicated by the equipment category for bridge use and connected systems. The existing database record provides no additional model-specific operating figure beyond the listed designation and category. Sensor principle, correction methods, interfaces and redundancy depend on the exact model and vessel installation. The exact model designation identifies sensing technology, interfaces and accuracy class; these characteristics must be confirmed from the approved manufacturer documentation.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Simrad first.
What our service work and the manufacturer documentation say about keeping this model running.
Compare the indicated value with independent references and investigate persistent disagreement rather than applying unrecorded corrections. Inspect sensors, antennas, cabling, power supplies, repeaters and network interfaces applicable to the installed equipment. Verify alarms and data outputs to radar, ECDIS, autopilot and voyage-data systems where connected. Keep calibration, deviation or configuration records current as appropriate to the sensor type. Protect exposed sensors from paint, deposits and water ingress. Refer to manufacturer and bridge-equipment documentation for exact test, calibration and alignment procedures.
Keep fuses, lamps or display consumables, selected power-supply and interface modules, cables or connectors and manufacturer-recommended sensor service parts. Replacement core sensors or processors must remain compatible with the approved bridge installation. Preserve calibration and configuration data when changing equipment.
Free of charge — we forward your request to qualified suppliers for Simrad equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Simrad VECTOR V114 — a part, a service call, a second opinion. Are you Simrad? Claim this brand page.
Service engineer? Write the day report for this VECTOR V114 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.