Furuno FAR-3230S-BB 4ft is a marine radar system. The display and controls are normally installed on the bridge, with the radar antenna and transceiver equipment located on the mast or another suitable elevated position. Its purpose is to detect and display surrounding targets and coastline returns to support navigation, collision avoidance and situational awareness. A marine radar installation combines antenna, transmitter or solid-state source, receiver, processing, display and heading or speed inputs, with the exact architecture depending on the model. The exact radar model distinguishes scanner technology, band, display functions and interfaces; these specifications must be confirmed from approved manufacturer documentation.
Masz kartę katalogową producenta dla tego modelu? Wyślij ją razem z formularzem zapytania — sprawdzimy ją i podamy źródło.
Zdjęcia, rysunki i podglądy stron z karty katalogowej tego modelu.
“USCG Approval for ARPA (Cat.1/Cat.2) The product has been assigned a U.S. Coast Guard Module B number, USCG approvals 165.115/EC0575 or 165.116/EC0575 as applicable, to note type approval to Module B…”
Co nasza praca serwisowa i dokumentacja producenta mówią o utrzymaniu tego modelu w ruchu.
Inspect antenna rotation, scanner condition, waveguide or cabling, power supplies and bridge connections. Verify that heading, speed and position inputs are valid and compare radar presentation with known targets. Check alarms, guard functions and target-tracking behavior using the vessel's approved test procedure. Inspect exposed scanner housings for salt, water ingress and damaged seals and maintain safe RF isolation before work aloft. Back up configuration data where supported and document software or hardware changes. Refer to manufacturer documentation for exact performance tests, magnetron or transmitter servicing and alignment procedures.
Keep fuses, power-supply modules or approved electronic spares, scanner drive consumables, seals and interface components recommended for the installed radar. If the design uses a serviceable transmitter component with a finite life, follow the manufacturer's spare strategy. Ensure replacement modules preserve type approval and software compatibility.
Bezpłatnie — wyślij zapytanie dotyczące sprzętu Furuno. Nasz zespół je sprawdzi i odpowie e-mailem.
Inne modele tego samego typu sprzętu, najpierw Furuno.
Powiedz nam, czego potrzebujesz do tego Furuno FAR-3230S-BB 4ft — części, wizyty serwisowej, drugiej opinii. Czy jesteś Furuno? Przejmij tę stronę marki.
Serwisant? Napisz raport dzienny dla tego FAR-3230S-BB 4ft w OceanSphere Work — zdjęcia, godziny i części, jako PDF dla armatora. Wypróbuj 14 dni za darmo →
Tak. Dane techniczne, dokumenty i uwagi serwisowe tego modelu są dostępne bez konta. Konto dodaje zapisane wyszukiwania i zapytania, niczego nie odbiera.
Tak. Podaj producenta, model i czego potrzebujesz — każde zapytanie czyta człowiek i odpowiada e-mailem.
Wyślij nam tabliczkę lub prawidłową wartość. Sprawdzimy ją w karcie danych producenta lub rejestrze towarzystwa klasyfikacyjnego i zaktualizujemy stronę.