OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Navigation› Radar & ECDIS› ECDIS› JRC (Japan Radio Co) JAN-9201 19-inch

JAN-9201 19-inch

ECDIS · Radar & ECDIS

Class-certified type (DNV register) · technical data sheet not yet verified

JRC (Japan Radio Co) JAN-9201 19-inch is listed in the source as a marine ECDIS within the Radar & ECDIS group. Equipment of this type is typically installed at the main bridge navigation console, normally with redundant or backup arrangements according to the vessel's approved bridge layout. Its primary duty is electronic chart display, route monitoring and integration of navigation sensor data, and it depends on approved chart data, position and heading inputs, bridge networks, display hardware and correctly controlled software or configuration. Neighboring variants can differ in rating, size, interface, approval basis or arrangement, so the complete model designation and actual nameplate data are important for identification. It normally interfaces with GNSS, gyro or heading sensors, speed log, AIS, radar overlay where fitted, bridge network and ship power. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Every value below comes from the manufacturer datasheet or class-society record on file for this model.

Display size19-inch
IMO CompliantYes
Chart formatS-57/S-63
Related models

Also in ECDIS.

Other models of the same equipment type, JRC (Japan Radio Co) first.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Verify chart status, sensor inputs, alarm behavior, backup arrangements, power supplies, display condition and network health. Check that route-monitoring and safety settings correspond with the vessel's procedures and approved configuration. Use manufacturer documentation and flag-state or class requirements for exact test and update procedures.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Typical onboard support includes approved data media as applicable, fuses, fans, power-supply or interface modules and replacement input devices according to the maker's support concept.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for JRC (Japan Radio Co) equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMICarrier MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All JRC (Japan Radio Co) models More like JAN-9201 19-inch
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this JRC (Japan Radio Co) JAN-9201 19-inch — a part, a service call, a second opinion. Are you JRC (Japan Radio Co)? Claim this brand page.

Service engineer? Write the day report for this JAN-9201 19-inch in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.