"> Kohler 200EKOF-60Hz
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 2 verified suppliers & service companies for Kohler in the Maritime Network Find suppliers →
Kohler

200EKOF-60Hz

Kohler 200EKOF-60Hz is listed as a Auxiliary Engine (Generator Set) within the Auxiliary Engines category. It is typically installed in the engine room as a propulsion or auxiliary diesel engine, connected to fuel, lubrication, cooling, starting-air and control systems. Its engineering role is to convert fuel energy into mechanical power for propulsion or electrical-generation duty. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.

Kohler 200EKOF-60Hz

Components & Design

Component data being added…

Technical Data

genset kw 200
genset kva 250.0
frequency hz 60
fuel type MDO
rpm 1800

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Fuel-injection deterioration or contamination can cause poor combustion, noticed as rough running, smoke, uneven exhaust temperatures or loss of power
Cooling-system fouling or leakage can raise temperatures, seen as high-temperature alarms or coolant loss
Lubrication problems can accelerate bearing and running-surface wear, noticed as abnormal pressure, temperature, noise or metallic debris
Air-path fouling or turbocharging faults can reduce combustion air, seen as smoke, low scavenge or boost performance and reduced output
Sensor, actuator or control-system faults can trigger alarms, derating or failed starts even when the mechanical engine remains serviceable

Service & Maintenance

Trend pressures, temperatures, exhaust condition, oil analysis and operating balance between cylinders. Inspect fuel, lube-oil, cooling, air and control-system components for leakage and deterioration. Clearances, torque values and wear limits must be taken from the manufacturer documentation for the exact engine variant.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Critical onboard spares normally include approved filters, seals and gaskets, fuel-system service parts, selected valve or injector components, sensors and other items required by the vessel’s maker-based spare-parts list.
Equipment Model #125641 · ✓ still in production