"> Global Davit GmbH Lmes.S. 14/3,5-10/6,0
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Global Davit GmbH in the Maritime Network Find suppliers →
Global Davit GmbH

Lmes.S. 14/3,5-10/6,0

The Global Davit GmbH Lmes.S. 14/3,5-10/6,0 is an IMO‑approved davit system for launching lifeboats or rescue rafts, featuring a motorised release mechanism and corrosion‑resistant construction.

Global Davit GmbH Lmes.S. 14/3,5-10/6,0
Persons capacity per SOLAS certification
Capacity
Crew Evacuation / Safety
Medium

Components & Design

Component data being added…

Technical Data

imo approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

On-Load-Release-Gear (OLRG)

Annual functional test at 1.1 × SWL; after test check locking; inspect for dried paint/contamination/corrosion in lock, thread/shank wear/cracks. 5-year dynamic test. SOLAS III / MSC.402(96).

Drahtseile (Falls/Wire Ropes)

Inspect for kinks, corrosion, strand breakage (>10% over 8d length = replacement), inaccessible sections; correct/certified ropes; if required turn for full inspection; renewal per manufacturer interval.

Bremse (Zentrifugal- + Haltebremse)

Brake pad wear; check lowering speed (SOLAS S=0.4+0.02H, max ~36 m/min); remote release function; brake not blocked by poor maintenance.

Korrosion der Davit-Struktur

Galvanized structure + stainless steel fasteners for pitting/discoloration; NDT of load-bearing structure for cracks; incident RRS Sir David Attenborough 2021 (severe corrosion due to poor maintenance).

Wartungs-Compliance

Planned maintenance complete since installation? Annual + 5-year tests recorded in logbook; manufacturer instructions followed; only authorized personnel (MSC.1/Circ.1205 Rev.1).

Type-general inspection and maintenance points for this equipment category — not model-specific.

Service & Maintenance

Engine test weekly (min. 5 min). Release hook maintenance annually by approved service (SOLAS MSC.402(96)). GRP hull inspection at docking. 5-year basic survey.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Spare parts via Global Davit GmbH or authorized distribution partners. Lead time: 2–6 weeks.

DNV type approval

Verified against the DNV Approval Finder — the certificate below is issued by DNV, not by us.

Certificate
9479410 HH
Open the certificate at DNV →
Equipment Model #12380 · ✓ still in production