OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 5 verified suppliers & service companies for MAN Energy Solutions in the Maritime Network Find suppliers →
Is MAN Energy Solutions your company? Claim this page
MAN Energy Solutions

14V16/24DF

MAN L 16/24 — Viertakt-Marinediesel, Bohrung 160 x Hub 240 mm, 1000 / 1200 rpm, 450-990 kW (depending on cylinder count and speed: 5L at 1000 rpm = 450 kW; 9L at 1200 rpm = 990 kW). Brennstoff: HFO (Heavy Fuel Oil) up to 700 cSt/50°C. Status: Legacy product, introduced 1990s, IMO Tier II certified, 3000 units sold globally (as of 2013). Verifiziert, Datenblatt verlinkt.

1540.0 kW
Power

Engine Specifications

14
Cylinders
160 mm
Bore
240 mm
Stroke
4-stroke
Stroke Type

Components & Design

Component data being added…

Technical Data

Configuration In-line, 4-stroke, turbocharged diesel engine
Bore x Stroke 160 mm × 240 mm
Cylinders available 5, 6, 7, 8, 9
Power at 1000 rpm 5L: 450 kW; 6L: 570 kW; 7L: 665 kW; 8L: 760 kW; 9L: 855 kW
Power at 1200 rpm 5L: 500 kW; 6L: 660 kW; 7L: 770 kW; 8L: 880 kW; 9L: 990 kW
Piston speed 8 m/s @ 1000 rpm; 9.6 m/s @ 1200 rpm
BMEP (Brake Mean Effective Pressure) 22.4 bar @ 1000 rpm; 20.7 bar @ 1200 rpm
Max combustion pressure 170 bar
Compression ratio 15.2:1
Swept volume per cylinder 4.8 liters
Weight range 9.5 to 13.1 tonnes
Dimensions (max) 1 m (width) × 2.4 m (height) × 5.8 m (length)
Fuel specification HFO up to 700 cSt/50°C; heavy fuel oil compliant
Engine type 4-stroke, in-line, turbocharged diesel, single-acting
Marine classification IMO Tier II compliant auxiliary/genset engine
power kw 1540
rpm 1200
fuel type LNG/MDO (Dual-Fuel)
configuration V

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Valve clearance adjustment failures causing valve bridge guide stress and engine breakdown

Verify valve clearance adjustment per manufacturer specification; incorrect adjustment leads to excessive stress on valve bridge guides and potential engine damage

Connecting rod bolt preload inconsistency - gap detected between bolt head and connecting rod in fully tightened assembled condition

Inspect connecting rod assembly for gaps between bolt head and rod; follow updated MAN tightening procedure to minimize maintenance-induced failure risk

Lube oil cooler overstress from improper power tool tightening and single-bolt procedures on pressurized coolers

Visually inspect all cooler bolts and nuts; replace if damage detected or if any doubt about integrity exists; avoid power tools on pressurized systems

Coolant water quality and treatment deficiency causing operational damage (nitrite-based additives require strict monitoring)

Monitor cooling water pH and nitrite additive concentration per schedule; inspect for sludging and water treatment adequacy; continuous lube oil separator operation mandatory for IMO NOx-retarded engines

Fuel injection valve opening pressure drop (up to 50 bar) after few operating hours when new nozzles installed

Verify fuel injection valve opening pressure within specification after new nozzle installation; monitor pressure drop during break-in period; deviation >40°C exhaust gas outlet temperature between cylinders indicates fuel valve inspection needed

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Equipment Model #123775 · ✓ still in production