"> MaK (Caterpillar) 16VVM43
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
MaK (Caterpillar)

16VVM43

The MaK (Caterpillar) 16VVM43 is a 16‑cylinder V‑type, four‑stroke marine diesel engine delivering up to 14 400 kW at 500 rpm, designed for main propulsion on large merchant vessels.

MaK (Caterpillar) 16VVM43
14400.0 kW
Power

Engine Specifications

16
Cylinders
430 mm
Bore
610 mm
Stroke
4-stroke
Stroke Type

Components & Design

Component data being added…

Technical Data

Bohrung 320 mm
Hub (Reihe) 480 mm
Hub (V-Form VM32C) 480 mm (teilweise Quellen: 420 mm, Widerspruch in Sekundärdatenbanken)
Typ 4-Takt Langsamläufer, Mittelschnellläufer, direkte Einspritzung, Turbogefeuert
Brennstoff MDO, LBF, HFO, Ultra-Low-Sulphur Fuel (75% der Flotte auf HFO)
Einführungsjahr 1994
Turbolader Hocheffiziente Ausführung, korrosionsfreies Gehäuse ohne Wasserkühlung
Abgasnorm IMO Tier II (IMO II)
Marktabsatz 1600+ Einheiten seit 1994 (80% Propulsion, 20% Genset)
power kw 14400
rpm 500
fuel type HFO/MDO
configuration V

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

SFOC specification and boost pressure: different efficiency values depending on configuration and load range documented (177–179 g/kWh); optimization of fuel consumption
Turbocharger wear: High-efficiency design with 'low wear rate due to calibration ring' is described; durably constructed, but specific wear
Fuel quality: Required for HFO operation — contamination and sulphur content are risks; 75% of the fleet runs on HFO, therefore high management risk
Lagerschale-Überwachung: Caterpillar bietet optionales 'Crankshaft Bearing Condition Monitoring System' an — deutet auf Lagerverschleiß als Inspektionsthema hin
Cooling system corrosion at seawater inlet: Indications of typical marine corrosion in cooling systems with seawater cooling; anodes and flushing required

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Equipment Model #123647 · ✓ still in production