"> Miele Marine Ironer 1600mm 230V Miele
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 7 verified suppliers & service companies for Miele Marine in the Maritime Network Find suppliers →
Is Miele Marine your company? Claim this page
Miele Marine

Ironer 1600mm 230V Miele

Miele Marine Ironer 1600mm 230V Miele is identified in the source list as a ironer / mangle. It is normally installed in the vessel's laundry, accommodation service area or other designated domestic machinery space. Its purpose is to iron and finish washed textiles using heated rollers or the pressing arrangement provided by the installed machine. The source record provides a stated power of 8.0 kW, and the existing record note '8 kW'. Marine installation requires secure mounting, suitable electrical supply, ventilation or drainage and protection against ship motion and vibration. The exact model designation distinguishes drum or roller size, electrical supply and control package from neighboring laundry machines; refer to the manufacturer documentation for the exact ratings.

8.0 kW
Power

Components & Design

Component data being added…

Technical Data

capacity kg 16
drum volume l 0
power kw 8
water consumption l 0
spin speed rpm 0

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Airflow, water-flow or surface restriction caused by lint, scale, textile residue or blocked filters, resulting in long cycles, poor performance or protective trips
●Heater or temperature-control failure caused by element, sensor or control faults, resulting in no heat, overheating or aborted operation
●Drive-belt, motor, roller or bearing deterioration caused by wear, overloading or misalignment, resulting in noise, poor rotation or stoppage
●Electrical-control faults caused by moisture, loose connections or component failure, resulting in intermittent operation, alarms or breaker trips
●Door, seal, hose or guarding deterioration caused by wear or loosening, resulting in leakage, heat loss or unsafe access

Service & Maintenance

Clean filters, lint paths, drains and accessible heating or roller surfaces appropriate to the installed machine. Inspect bearings, drive components, door or guarding interlocks and electrical connections for wear or overheating. Verify safety interlocks and emergency stop functions where fitted. Keep the machine securely fastened to its marine foundation and inspect anti-vibration mounts. Investigate repeated trips rather than resetting the machine without identifying the cause. Refer to the manufacturer documentation for exact servicing intervals and electrical checks.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep door seals, drive belts where fitted, filters, selected valves or pumps, fuses, heating components and manufacturer-recommended control or sensor parts. High-utilization passenger or offshore accommodation vessels may justify additional wear items. Confirm exact spares from the model and serial number.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Miele Marine?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #122674 · ✓ still in production