"> MKN Marine Dishwasher XL 400V Marine
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Is MKN Marine your company? Claim this page
MKN Marine

Dishwasher XL 400V Marine

MKN Marine Dishwasher XL 400V Marine is identified in the source list as a dishwasher. It is installed in the ship's galley or catering area with the required electrical, ventilation, drainage, water or exhaust connections for the installed design. Its purpose is to wash and sanitize galley crockery, utensils or kitchenware using controlled water circulation and heating. The source record provides a stated power of 10.0 kW, and the existing record note '10 kW'. Marine versions require secure installation, suitable isolation and controls that remain reliable under frequent use, vibration and ship motion. The exact model designation distinguishes appliance size, electrical supply, heating method or extraction arrangement from neighboring galley equipment; refer to manufacturer documentation for the exact ratings.

10.0 kW
Power

Components & Design

Component data being added…

Technical Data

power kw 10
capacity standard
fuel electric

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Heating or drive component failure caused by wear, overheating or electrical faults, resulting in slow operation, no heat or inability to complete the normal cycle
●Temperature, level or control-sensor malfunction caused by drift or component failure, resulting in unstable operation, alarms or incorrect temperature
●Door, lid, seal or duct deterioration caused by repeated use and heat, resulting in leakage, heat loss or poor extraction
●Electrical-control fault caused by moisture, loose terminals or failed relays, resulting in intermittent operation or breaker trips
●Drain, filter, grease path or ventilation restriction where applicable caused by food deposits or poor cleaning, resulting in leakage, odor, overheating or reduced performance

Service & Maintenance

Keep heating surfaces, filters, drains, grease paths and ventilation openings clean as applicable to the appliance. Inspect electrical terminals, controls, doors, guards and safety interlocks for heat damage or looseness. Verify temperature or cycle control using the vessel's approved maintenance method and investigate repeated overheating or breaker trips. Check secure fastening to the galley structure and inspect flexible service connections where fitted. Use cleaning chemicals compatible with stainless steel, seals and heating components. Refer to manufacturer documentation for exact electrical ratings, calibration procedures and service limits.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep door or lid seals, thermostats or temperature sensors, selected heating elements, pumps or fans where applicable, fuses, switches and manufacturer-recommended control parts. High-use passenger vessels may justify additional wear components. Verify all electrical and mechanical parts against the appliance nameplate.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for MKN Marine?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #121602 · ✓ still in production