"> Electrolux Professional Marine Ironer 1600mm 400V Marine
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Is Electrolux Professional Marine your company? Claim this page
Electrolux Professional Marine

Ironer 1600mm 400V Marine

Electrolux Professional Marine Ironer 1600mm 400V Marine is identified in the source list as a ironer / mangle. It is installed in the vessel's laundry or accommodation service area and connected to the electrical supply and ventilation or steam services required by the machine. Its purpose is to iron and finish laundered textiles using heated rollers or pressing surfaces. The source record provides a stated power of 8.0 kW. The machine combines heated surfaces, roller or feed drive, guards, temperature control and emergency stopping appropriate to marine laundry service. The exact model designation distinguishes roller width, heating method and electrical configuration from neighboring ironers; refer to the manufacturer documentation for the exact figure.

8.0 kW
Power

Components & Design

Component data being added…

Technical Data

capacity kg 16
drum volume l 0
power kw 8.0
water consumption l 0
spin speed rpm 0

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Heating-element or steam-supply failure caused by component wear or control faults, resulting in poor ironing temperature or an aborted cycle
●Roller or feed-drive deterioration caused by belt, motor or bearing wear, resulting in uneven feeding, noise or stoppage
●Temperature-control failure caused by sensor or thermostat faults, resulting in overheating, poor finish or protective trip
●Guard or safety-bar interlock failure caused by wear or switch faults, resulting in inability to start or unsafe operation
●Roller-surface contamination or padding wear caused by textile residue and long service, resulting in marks, wrinkling or uneven finish

Service & Maintenance

Clean roller and feed surfaces and inspect guards, emergency stops, drive components, bearings and heating controls. Check electrical terminals for heat damage and verify temperature control and safety interlocks using the approved procedure. Keep clothing and loose materials clear of the feed mechanism and maintain correct operator guards. Inspect mounting and vibration isolation for looseness. Investigate repeated trips or uneven heating before continued use. Refer to the manufacturer documentation for the exact figure for temperatures, clearances and service intervals.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep drive belts or chains where fitted, bearings, temperature sensors, heating components, safety switches, padding or roller consumables and manufacturer-recommended control parts. High-use passenger vessels may justify additional wear items. Confirm exact spares from model and serial number.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Electrolux Professional Marine?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #114271 · ✓ still in production