RO-600 Marine
Sasakura RO-600 Marine is a reverse-osmosis water treatment unit in the supplied category 'Water Treatment / Reverse Osmosis Unit'. It is normally installed in a machinery or utility space with feed, reject and product-water connections. It is intended to produce freshwater by forcing seawater or feedwater through semi-permeable membranes. Compared with neighbouring entries in the same series, the supplied data identifies this variant by the source-listed characteristic 25.0 m³/h capacity. In service it interfaces with feedwater piping, pretreatment or strainers, pumps, product-water line, reject or drain connections and control instrumentation. Model-specific limits, settings, dimensions and acceptance criteria that are not stated in the supplied data should be taken from the manufacturer documentation.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Trend production rate and product-water quality, inspect feed strainers, pumps, valves, seals and the treatment element appropriate to the technology. Clean or replace membranes, heat-transfer surfaces or UV lamps only by approved procedures and verify alarms and automatic diversion or shutdown functions. Exact chemical-cleaning limits, pressures and water-quality criteria must follow manufacturer and vessel documentation.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →