"> Metos Marine Viking Cool 400L gas
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 3 verified suppliers & service companies for Metos Marine in the Maritime Network Find suppliers →
Metos Marine

Viking Cool 400L gas

Metos Marine Viking Cool 400L gas is a marine refrigerator or freezer. It is normally installed in the galley, provision stores or accommodation service area with secure marine mounting and ventilation. Its primary purpose is to maintain food or stores at controlled low temperature. Marine units must remain secure during vessel motion and depend on adequate condenser ventilation or cooling under machinery-space temperature conditions. The supplied record already contains the available concise model or rating information, so those existing figures are not duplicated here and no additional meaning is inferred from the model code. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

1.0 kW
Power

Components & Design

Component data being added…

Technical Data

power kw 1
capacity 6 GN 1/1
fuel gas

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Refrigerant leakage or compressor deterioration causes rising cabinet temperature and long compressor running periods
Condenser fouling or poor ventilation causes high condensing temperature and repeated compressor trips
Door-gasket damage causes warm-air ingress, icing and excessive running
Thermostat or temperature-sensor failure causes unstable temperature or failure to cycle correctly
Defrost or drain faults cause ice accumulation, water leakage or blocked airflow

Service & Maintenance

Inspect door seals, cabinet condition, compressor, condenser, fans, thermostat, drains and secure mounting. Clean condenser surfaces and check for refrigerant or oil traces. Verify temperature indication against the vessel's food-storage procedures. Exact refrigerant charge and control settings require manufacturer documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry door seals, thermostats or sensors, fan motors, relays, drain parts, approved refrigerant-service consumables and compressor electrical components.
Equipment Model #113266 · ✓ still in production