Hempadur 15553 / Hempalin Primer Hi-Build 13200 / Hempalin Enamel 52140
Hempadur 15553 / Hempalin Primer Hi-Build 13200 / Hempalin Enamel 52140 by Hempel A/S. DNV MED certificate MEDB000006D.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Sa 2.5 (ISO 8501-1) surface roughness with Rugotest No. 3 or ISO comparator rough-medium inspect; visual inspection white surface
Ion tester before/after blast cleaning (ISO 8502-1/2/3); limit value <50 mg/m² PSPC
DFT meter use; 90% measured values ≥256 µm at 320 µm nominal; edges with stripe coating; all values document
Cure time per manufacturer instructions (Hempadur 15570: 5-47 hours); temperature monitoring (T ↓10°C ×2); full cure 1-2 months before test
ISO 4624 pull-off test after 1-2 months full cure; minimum adhesion ≥5 MPa immersion; ≥8 MPa >250 µm; 3 measurements/100 m²
Visual 100% inspection for blisters/scratches/peeling; surface roughness global max. 125 µm inspect; finish standard per ship class
Type-general inspection and maintenance points for this equipment category — not model-specific.
Service & Maintenance
Coating inspection at docking. Anode check every 6 months. Touch-up work on damage immediately. Antifouling renewal at docking (every 5 years).
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →