"> Ziehl-Abegg Marine ZAmarine Emergency 30000m3h cargo hold
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Is Ziehl-Abegg Marine your company? Claim this page
Ziehl-Abegg Marine

ZAmarine Emergency 30000m3h cargo hold

Ziehl-Abegg Marine ZAmarine Emergency 30000m3h cargo hold is identified in the source list as a emergency fire fan. It is installed in a fan room, duct section, machinery space or weather-deck ventilation opening and connected to the vessel's supply or exhaust ductwork. Its purpose is to move ventilation air into, through or out of accommodation, machinery, cargo or technical spaces according to the listed fan duty. The source record provides a stated power of 9.0 kW. The fan assembly normally includes impeller, casing, motor, bearings or direct drive, flexible connections and local or remote controls. The exact model designation and any source-listed power or airflow distinguish fan size and duty from neighboring ventilation units; refer to the manufacturer documentation for the exact figure.

9.0 kW
Power

Components & Design

Component data being added…

Technical Data

air flow m3h 30000
static pressure pa 300
power kw 9.0
fan type emergency
zone cargo hold

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Airflow loss caused by fouled blades, blocked dampers, dirty screens or duct restriction, resulting in poor space ventilation
●Bearing or motor deterioration caused by wear, inadequate lubrication or overheating, resulting in noise, vibration or high current
●Impeller imbalance caused by dirt, corrosion or physical damage, resulting in increased vibration and structural noise
●Flexible-connection or mounting failure caused by vibration and age, resulting in air leakage, transmitted vibration or abnormal movement
●Control, damper or starter fault caused by actuator, wiring or electrical problems, resulting in inability to start, stop or establish the required airflow direction

Service & Maintenance

Inspect fan blades, casing, bearings, motor, guards, flexible connections, dampers and foundations. Clean accumulated dust, grease or salt that can alter balance or restrict airflow. Trend vibration, motor current and bearing condition where practical and investigate changes from normal operation. Check rotation direction after electrical work and verify remote start, stop and fire-damper interlocks. Inspect weather louvers and ductwork for corrosion, obstruction and water ingress. Refer to the manufacturer documentation for the exact figure for bearing, belt, airflow and motor limits.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep bearings, belts where fitted, flexible connectors, motor or fan components, damper actuators, filters or screens and manufacturer-recommended starter or control parts. Critical machinery-space ventilation may justify a spare motor or impeller assembly. Verify rotation and electrical rating before replacement.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Ziehl-Abegg Marine?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #112133 · ✓ still in production