Axial Fan · Ventilation
Howden Marine HMF Axial 500m3h engine room is listed in the source as a marine Axial Fan within the Ventilation group. Equipment of this type is typically installed in accommodation, machinery or service spaces, with air-handling components located in ventilation rooms, ducts or local compartments according to the vessel layout. Its primary duty is ventilation, heating, cooling or air circulation associated with the Axial Fan, and it uses fans, coils or refrigerant components where fitted, filters, dampers and controls to maintain airflow and the required space condition. The supplied entry records rated power 0.2 kW; these stated values should be retained when the unit is identified or compared with neighboring variants. It normally interfaces with ship electrical power, ventilation ducting, chilled or hot water or refrigerant circuits where fitted, drains, dampers and automation controls. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Howden Marine first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect filters, coils, fans, bearings, drains, dampers, insulation and controls. Confirm airflow is unobstructed and compare temperature or pressure indications with normal vessel trends rather than relying on a single reading. Refer to manufacturer documentation for exact refrigerant, airflow and service values.
Typical spares include filters, belts where fitted, fan bearings or motor parts, control sensors, actuators, drain components, contactors and approved sealing items for the relevant heating or cooling circuit.
Free of charge — we forward your request to qualified suppliers for Howden Marine equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Howden Marine HMF Axial 500m3h engine room — a part, a service call, a second opinion. Are you Howden Marine? Claim this brand page.
Service engineer? Write the day report for this HMF Axial 500m3h engine room in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.