Self-Contained AC Unit · Air Conditioning
Bronswerk Marine BAC Self-Contained 10kW R134a is identified in the source list as a marine self-contained air-conditioning unit. It is installed in an HVAC machinery space or locally within the served accommodation or technical zone, with cooling-water, refrigerant, air and electrical connections appropriate to the design. Its purpose is to remove heat and humidity from shipboard spaces and maintain the required accommodation or equipment-room climate. The source record provides no additional model-specific operating figure beyond the listed designation and category. The system combines compressor, evaporator, condenser, fans or pumps, expansion control and safety devices, with central chilled-water distribution used where applicable. The exact model designation and any source-listed capacity or power distinguish cooling duty and electrical arrangement from neighboring AC units; refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Bronswerk Marine first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect refrigerant piping, compressors, heat exchangers, fans or pumps, filters, condensate drains and electrical terminals. Clean air and water-side heat-transfer surfaces and maintain unobstructed airflow or cooling-water flow. Investigate abnormal compressor cycling, icing or repeated pressure trips rather than resetting the unit without diagnosis. Check condensate drainage under cooling load and inspect insulation for moisture damage. Verify temperature sensors and control devices respond correctly. Refer to the manufacturer documentation for the exact figure for refrigerant charge, pressures, water flow, electrical settings and service values.
Keep air filters, fan or pump service parts, temperature and pressure sensors, control boards or relays, drain parts and manufacturer-recommended refrigeration components. Refrigerant, compressor and expansion-control spares must match the exact approved system. Verify electrical supply and model compatibility before replacement.
Free of charge — we forward your request to qualified suppliers for Bronswerk Marine equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Bronswerk Marine BAC Self-Contained 10kW R134a — a part, a service call, a second opinion. Are you Bronswerk Marine? Claim this brand page.
Service engineer? Write the day report for this BAC Self-Contained 10kW R134a in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.