Ship-to-Ship Cargo Hose · Cargo Hoses & Manifolds
IVG Colbachini IVG Ship-to-Ship 16in x 18m is identified in the source list as a ship-to-ship cargo hose. It is normally installed or arranged in the cargo manifold, transfer station or offshore hose string. Its purpose is to transfer liquid or liquefied-gas cargo while maintaining containment and flexibility. The source record provides no additional model-specific operating figure beyond the listed designation and category. The equipment is based on liner, reinforcement, cover, end fittings and bonding provisions. The exact model designation distinguishes the installed configuration from neighboring variants in the same category; refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, IVG Colbachini first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect the entire hose length, end fittings, covers, identification and lifting or support points before transfer. Keep bend radius and support within the approved handling arrangement and prevent dragging, crushing or sharp contact. Perform required pressure, leak or continuity tests using approved procedures and maintain hose certificates and service history. Inspect gaskets and flange faces before connection and control hose movement during transfer. Remove any hose with bulges, exposed reinforcement, severe abrasion or suspect end fitting from service pending approved assessment. Refer to the manufacturer documentation for the exact figure for test pressure, bend radius, service life and temperature limits.
Keep approved flange gaskets, protective caps, bonding leads where applicable, handling slings and hose-support consumables. Complete certified spare hoses may be required for critical cargo service. Replacement hoses must match cargo, pressure, temperature and connection requirements.
Free of charge — we forward your request to qualified suppliers for IVG Colbachini equipment from our network of over 114,000 maritime companies.
Tell us what you need for this IVG Colbachini IVG Ship-to-Ship 16in x 18m — a part, a service call, a second opinion. Are you IVG Colbachini? Claim this brand page.
Service engineer? Write the day report for this IVG Ship-to-Ship 16in x 18m in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.