Ship-to-Ship Cargo Hose · Cargo Hoses & Manifolds
Trelleborg Marine TM Ship-to-Ship 16in x 18m is a ship-to-ship cargo hose. It is normally installed or arranged in the cargo manifold, transfer station or offshore hose string. Its purpose is to transfer liquid or liquefied-gas cargo while maintaining containment and flexibility. The equipment is based on liner, reinforcement, cover, end fittings and bonding provisions. The exact model designation distinguishes the installed configuration from neighboring variants in the same category; refer to the manufacturer documentation for the exact figure.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect the entire hose length, end fittings, covers, identification and lifting or support points before transfer. Keep bend radius and support within the approved handling arrangement and prevent dragging, crushing or sharp contact. Perform required pressure, leak or continuity tests using approved procedures and maintain hose certificates and service history. Inspect gaskets and flange faces before connection and control hose movement during transfer. Remove any hose with bulges, exposed reinforcement, severe abrasion or suspect end fitting from service pending approved assessment. Refer to the manufacturer documentation for the exact figure for test pressure, bend radius, service life and temperature limits.
Keep approved flange gaskets, protective caps, bonding leads where applicable, handling slings and hose-support consumables. Complete certified spare hoses may be required for critical cargo service. Replacement hoses must match cargo, pressure, temperature and connection requirements.
Free of charge — send us your request for Trelleborg Marine equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Trelleborg Marine first.
Tell us what you need for this Trelleborg Marine TM Ship-to-Ship 16in x 18m — a part, a service call, a second opinion. Are you Trelleborg Marine? Claim this brand page.
Service engineer? Write the day report for this TM Ship-to-Ship 16in x 18m in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.