"> TS Marine Portable Gun 5m3h 4bar
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
TS Marine

Portable Gun 5m3h 4bar

TS Marine Portable Gun 5m3h 4bar is a portable marine tank-cleaning gun. It is normally installed at cargo or service tanks during cleaning, connected temporarily to the vessel cleaning-water or cleaning-fluid supply. Its primary purpose is to direct a controlled cleaning jet onto tank surfaces where fixed machines are unavailable or supplementary manual cleaning is required. Compared with permanently installed programmable tank-cleaning machines, the portable gun relies on manual positioning and hose handling and therefore places more emphasis on hose integrity, restraint and operator control. The supplied record already contains the available concise model or rating information, so those existing figures are not duplicated here and no additional meaning is inferred from the model code. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

coverage diameter m 2
flow rate m3h 5
pressure bar 4
rotation type manual
media water/chemical

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Nozzle blockage or internal deposits distort the jet and cause reduced cleaning reach or uneven tank coverage
Swivel, valve or trigger wear causes leakage, difficult control or inability to shut off the cleaning stream
Hose deterioration or connection damage causes external leakage and unsafe movement under pressure
Corrosion or mechanical damage to the body and nozzle causes leakage, poor jet form or loss of structural integrity
Insufficient supply flow or pressure caused by upstream pump or valve problems produces weak cleaning action

Service & Maintenance

Inspect nozzle condition, valves, swivel joints, hose, couplings, restraints and external corrosion before use. Confirm that the supply hose is suitable for the cleaning medium and securely connected. Check free movement and shutoff function before entering service. Refer to the manufacturer documentation for the exact figure for allowable pressure, flow and cleaning-medium limits.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry nozzle inserts where replaceable, valve and swivel seal kits, hose gaskets, couplings, approved replacement hose sections and retaining or restraint hardware.
Equipment Model #104701 · ✓ still in production