"> TS Marine TC-300 15m dia 15m3h 8bar
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Is TS Marine your company? Claim this page
TS Marine

TC-300 15m dia 15m3h 8bar

TS Marine TC-300 15m dia 15m3h 8bar is a programmable tank cleaning machine in the supplied category 'Tank Cleaning Equipment / Programmable Tank Cleaning Machine'. It is normally installed inside cargo or process tanks, connected to the tank-cleaning supply system. It is intended to distribute cleaning liquid over tank surfaces so residues can be removed between cargoes or during maintenance. Compared with neighbouring entries in the same series, the supplied data identifies this variant by the source-listed characteristic 8 bar. In service it interfaces with the cleaning-water or cleaning-medium supply, deck piping or hoses, tank access arrangement and any rotation or programming mechanism. Model-specific limits, settings, dimensions and acceptance criteria that are not stated in the supplied data should be taken from the manufacturer documentation.

Components & Design

Component data being added…

Technical Data

coverage diameter m 15
flow rate m3h 15
pressure bar 8
rotation type programmable
media water

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Blocked nozzles or debris in the supply path distort the jet pattern and leave poorly cleaned areas
●Worn bearings, gears or turbine parts can stop or slow rotation, noticed as incomplete coverage or an abnormal cleaning pattern
●Seal leakage reduces effective pressure and causes visible leakage at the machine or connection
●Scale, cargo residue or corrosion can seize moving parts and prevent correct indexing or rotation
●Incorrect setup or damaged hoses and couplings can reduce flow, create leaks or make the unit unsafe to handle

Service & Maintenance

Flush and inspect the machine after service, check nozzles, strainers, seals, rotating or indexing parts and hose or deck connections. Confirm that rotation or programmed movement is complete and free without forcing the mechanism. For exact cleaning pressure, flow, pattern, lubrication and overhaul criteria, refer to manufacturer documentation and the vessel's tank-cleaning procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep nozzle inserts where replaceable, seals and O-rings, bearings or gear service kits, strainers, hose seals and coupling parts recommended for the installed tank-cleaning equipment.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for TS Marine?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #104455 · ✓ still in production