Power Cable (0.6/1 kV) · Cable & Wiring
Prysmian IRCWOU 3Cx185mm2 0.6/1kV braid — 185 mm² cross-section. The supplied category identifies the equipment as Power Cable (0.6/1 kV), and it is normally installed in cable trays, penetrations and equipment terminations between switchboards, machinery, sensors or communication systems. In that listed role, its primary purpose is to carry electrical power, control signals or data between shipboard equipment. Power, medium-voltage, fire-resistant, control, instrumentation and communication cables differ in conductor, insulation, screening and fire-performance requirements, so replacement cable must match the approved specification. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Prysmian first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect accessible cable runs, supports, penetrations, glands, terminations and signs of heat, oil or mechanical damage. Check insulation condition and termination integrity using an approved test method appropriate to the circuit. Maintain fire stopping, segregation and shielding arrangements at penetrations and terminations. Refer to the cable and connected-equipment documentation for the exact figure for test voltage, bend radius and termination requirements.
Carry approved glands, lugs, ferrules, heat-shrink or jointing materials and representative replacement cable for critical circuits where vessel practice requires it.
Free of charge — we forward your request to qualified suppliers for Prysmian equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Prysmian IRCWOU 3Cx185mm2 0.6/1kV braid — a part, a service call, a second opinion. Are you Prysmian? Claim this brand page.
Service engineer? Write the day report for this IRCWOU 3Cx185mm2 0.6/1kV braid in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.