"> Current Corp (Miros) WaveRadar
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 10 verified suppliers & service companies for Current Corp (Miros) in the Maritime Network Find suppliers →
Current Corp (Miros)

WaveRadar

WaveRadar is a bridge‑mounted microwave sensor that provides real‑time wave height and period data to support safe cargo handling and navigation decisions. The supplied category identifies the equipment as Camera System, and it is normally installed on the bridge or within the vessel security and recording network with cameras, sensors, displays or data-storage interfaces. In that listed role, its primary purpose is to record voyage data, monitor bridge activity, supervise watchkeeping or support vessel security according to the listed function. VDR, BNWAS, CCTV, access-control, SSAS and LRIT systems have different statutory roles, so alarms, data retention and communication paths must be checked against the actual installation. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. The source metadata also states capacity: Microwave sensor. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Current Corp (Miros) WaveRadar
Microwave sensor
Capacity
Navigation Data / Sensor
Medium

Components & Design

Component data being added…

Technical Data

type Microwave sensor

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Sensor, camera or input failure causes missing data, blank images or channel alarms
Power-supply, UPS or network faults cause system restart, loss of recording or unavailable remote status
Storage-media or recorder faults cause gaps in retained data or failed self-tests
Incorrect time, configuration or interface data causes inconsistent records or false alarms
Control, acknowledgment or communication faults cause unavailable watchkeeping or security functions

Service & Maintenance

Review self-tests, event logs, time synchronization, power supplies, storage status and connected sensor channels. Verify required alarms and communication paths under the approved procedure without sending unauthorized security alerts. Check data quality and retention status where applicable. Refer to manufacturer and statutory documentation for the exact figure for test and retention criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry approved storage or recorder modules where supported, power supplies, network interfaces, camera parts, fuses and backed-up configuration data.
Equipment Model #951 · ✓ still in production