"> Prysmian FRHF-P 1Cx10mm2 0.6/1kV
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 2 verified suppliers & service companies for Prysmian in the Maritime Network Find suppliers →
Is Prysmian your company? Claim this page
Prysmian

FRHF-P 1Cx10mm2 0.6/1kV

Prysmian FRHF-P 1Cx10mm2 0.6/1kV is listed as a marine fire resistant cable (frhf) in the Cable & Wiring / Fire Resistant Cable (FRHF) category. Equipment of this class is typically installed in cable trays, trunks, conduits, machinery spaces, accommodation, deck routes, or dedicated electrical runs between the connected equipment. Its shipboard purpose is to transmit electrical power, control, instrumentation, or communication signals while withstanding the environmental and fire-performance requirements of the installation. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. No additional verified rating, capacity, weight, dimension, or other model-specific figure is supplied in the structured source data. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.

Components & Design

Component data being added…

Technical Data

cross section mm2 10
voltage class 0.6/1kV
cores 1
material Cu
insulation XLPE
fire rating IEC60331
halogen free True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Insulation damage from heat, abrasion, oil, chemicals, or mechanical impact causes earth faults, leakage current, or intermittent circuits
●Loose or corroded terminations increase contact resistance and appear as heating, voltage drop, or unstable signals
●Water ingress through glands, junction boxes, or damaged sheath causes corrosion, insulation deterioration, or repeated electrical faults
●Excessive bending, unsupported runs, or vibration damages conductors or shielding and can produce intermittent open circuits
●Fire or thermal exposure beyond the cable's design condition can degrade insulation and lead to loss of continuity or short circuit

Service & Maintenance

Inspect accessible routes, support spacing, bend condition, segregation, glands, penetrations, fire stops, sheath damage, terminations, earthing or shielding, and signs of overheating. Insulation and continuity testing must suit the circuit and connected equipment; refer to approved cable data for exact test voltages and installation limits.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep approved glands, lugs, ferrules, terminals, junction-box sealing items, repair sleeves where permitted, and suitable replacement cable of the exact approved type and rating.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Prysmian?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #85879 · ✓ still in production