Service Air Compressor · Compressors
Tamrotor Tamrotor Marine TS 1000/13 is identified in the source list as a service air compressor. It is normally installed in the engine room, deck machinery area or utility space and connected to the corresponding compressed-air receiver and distribution system. Its purpose is to generate compressed air for the starting, service or deck duty identified by the equipment category. The source record provides the existing record note '13 bar'. The exact compressor architecture, cooling arrangement, unloading system and drive configuration are model-specific and must be confirmed from manufacturer data. The exact model designation and any pressure or capacity information contained in the source distinguish size and service from neighboring compressors; refer to the manufacturer documentation for the exact figures.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Tamrotor first.
What our service work and the manufacturer documentation say about keeping this model running.
Monitor suction and discharge conditions, temperatures, vibration and capacity-control behavior in accordance with the vessel procedures. Inspect coolers, valves, filters, drains, bearings and lubrication system where applicable. Check for air, gas, oil and cooling-water leakage and investigate recurring trips rather than repeatedly restarting the machine. Function-test unloading, capacity-control and protective devices using approved procedures. Keep system cleanliness and material compatibility under control. Refer to manufacturer and class documentation for exact clearances, alarm limits and overhaul criteria.
Keep model-correct seals or packing, valve or compression-element service parts, bearings, filters, gaskets and capacity-control or unloader components recommended by the manufacturer. Service-critical materials must match the handled medium. Confirm all parts against the compressor serial number and application.
Free of charge — we forward your request to qualified suppliers for Tamrotor equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Tamrotor Marine TS 1000/13 — a part, a service call, a second opinion. Are you Tamrotor? Claim this brand page.
Service engineer? Write the day report for this Marine TS 1000/13 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.