OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Engine Room› Pumps› Progressive Cavity Pump› Heishin Mohno 5-12

Mohno 5-12

Progressive Cavity Pump · Pumps

Class-certified type (DNV register) · technical data sheet not yet verified

The Heishin Heishin Mohno 5-12 is a progressive-cavity positive-displacement pump. It is normally installed in sludge, bilge, waste, fuel or process systems. It is designed for steady low-pulsation transfer of viscous, contaminated or shear-sensitive liquids. In operation, a helical rotor turns inside a stator to move sealed cavities toward discharge. The supplied entry states the pressure designation as 12 bar; this information is retained unchanged. Compared with neighbouring models, the relevant differences are rotor/stator size, stages, elastomer/material selection and drive; these must be confirmed from the installed documentation rather than inferred from the model designation alone. Service and survey attention should concentrate on dry-running protection, rotor/stator wear, seal leakage, drive load and suction condition. For exact ratings, dimensions, tolerances, test limits and model-specific settings, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Every value below comes from the manufacturer datasheet or class-society record on file for this model.

Pump Typeprogressive cavity
Flow Rate (m³/h)5
Pressure (bar)12
Related models

Also in Progressive Cavity Pump.

Other models of the same equipment type, Heishin first.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Trend suction/discharge pressure, flow where available, motor current, vibration, bearing temperature and leakage. Inspect strainers, valves, seals, bearings, coupling, foundation and rotation and verify standby/changeover arrangements for critical services. Apply pump-type-specific manufacturer limits during overhaul.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry seals or packing, gaskets, bearings, coupling elements, filter/strainer consumables and selected motor/starter parts. Critical duties may justify a spare impeller, rotor/stator, screw/gear set or complete pump according to the actual pump principle.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for Heishin equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMICarrier MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Heishin models More like Heishin Mohno 5-12
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this Heishin Mohno 5-12 — a part, a service call, a second opinion. Are you Heishin? Claim this brand page.

Service engineer? Write the day report for this Mohno 5-12 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.