Cargo Pump (Deepwell) · Pumps
Naniwa FE Series by Naniwa Pump is a deepwell cargo-pump series intended to transfer liquid cargo from a tank through a vertically arranged pump column. The pump assembly places the hydraulic pumping element low in or near the cargo while the drive and sealing arrangement are integrated through the tank-top or deck penetration. This configuration reduces reliance on long suction lines and is suited to cargo systems where tank drainage and segregation are important. Condition of the line shaft, column bearings, deck seal, impeller and discharge arrangement directly affects vibration, leakage and capacity. Different FE-series executions may use different materials, drive arrangements and hydraulic sizes according to cargo duty. Confirm cargo compatibility, seal arrangement and exact installed configuration from the manufacturer documentation and vessel cargo-system drawings.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Trend vibration, cargo rate, discharge pressure and leakage for each pump so deterioration can be detected before loss of duty. Inspect the deck seal, shaft/column support arrangement and drive system according to the maker PMS and cargo safety procedures. Flush, drain or gas-free the system as required before opening any cargo-wetted component. After overhaul, verify rotation, alignment, leakage and remote/ESD functions relevant to the cargo system. Class or statutory survey may include cargo-pumping safety functions, hazardous-area equipment and containment integrity. Use the manufacturer documentation for exact bearing clearances, seal settings and overhaul intervals.
| Line shaft bearing inspection | condition-based, commonly at dry-docking - confirm against Naniwa's own manual for the FE series |
|---|---|
| Deck seal inspection/renewal | condition-based, typically at each dry-docking |
Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.
Cargo pumps are checked at survey for correct operation and high-level trip interlock function; detailed service intervals specific to the Naniwa FE series were not independently verified here and should be confirmed against the maker's own technical manual before use.
Estimated lifetime: Deepwell cargo pumps of this general type commonly remain in service 20+ years with column, bearing and seal renewals at dry-docking, though this is a bauart-typical figure and not specific to the FE series.
Carry seal kits for the deck penetration and drive unit, gaskets/O-rings, bearings or bushings identified by the maker, and critical coupling/drive components. Where cargo service is essential and supply is difficult, consider a serviceable impeller or pump-stage components matched to the installed material specification. Confirm all wetted spares for cargo compatibility and exact serial-number execution.
Free of charge — send us your request for Naniwa Pump equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Naniwa Pump first.
Tell us what you need for this Naniwa Pump FE Series — a part, a service call, a second opinion. Are you Naniwa Pump? Claim this brand page.
Service engineer? Write the day report for this FE Series in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.