OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Engine Room› Vibration Monitoring› Vibration Monitoring System› Wilcoxon Marine WS-1ch Ethernet
Wilcoxon Marine

WS-1ch Ethernet

Vibration Monitoring System · Vibration Monitoring

Class-certified type (DNV register) · technical data sheet not yet verified

Wilcoxon Marine WS-1ch Ethernet — Vibration Monitoring. The supplied category identifies the equipment as Vibration Monitoring System, and it is normally installed on exposed deck, shell openings, mooring stations or cargo-access areas according to the vessel structural arrangement. In that listed role, its primary purpose is to guide, secure, close, drain, ventilate or provide access as identified by the listed fitting type. Bollards, fairleads, chocks, doors, hatches, pipes and covers perform different structural functions, so their load path, sealing and securing details must follow the vessel drawings. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Channels1
Measurement typevelocity/acceleration
Frequency range (Hz)1-20000
ConnectivityEthernet
Portable or onlineportable
Related models

Also in Vibration Monitoring System.

Other models of the same equipment type, Wilcoxon Marine first.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Inspect structural attachment, corrosion, welds, fasteners, moving parts, seals and coatings. Verify free movement, drainage, closing and securing functions according to the fitting type. Pay particular attention to load-bearing foundations and watertight or weathertight boundaries. Refer to class, vessel and manufacturer documentation for the exact figure for loads, clearances and acceptance limits.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry seals or gaskets, pins, bushes, rollers, approved fasteners, lubrication items and small operating hardware appropriate to the installed fitting.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for Wilcoxon Marine equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokAlfa LavalEndress+HauserMAN Energy SolutionsWärtsiläSEIMIABB MarineMacGregorNovenco MarineHanla IMSDESMICarrier MarineGS-HydroAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like WS-1ch Ethernet
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this Wilcoxon Marine WS-1ch Ethernet — a part, a service call, a second opinion. Are you Wilcoxon Marine? Claim this brand page.

Service engineer? Write the day report for this WS-1ch Ethernet in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.