SKVG-C-800
Saacke SKVG-C-800 is a shipboard waste incinerator listed for marine waste-burning service listed in the supplied equipment record. It is normally installed in a dedicated machinery or incinerator space with fuel, combustion-air, exhaust and waste-handling connections. Its primary purpose is to reduce approved shipboard combustible waste and sludge in a controlled combustion chamber. Compared with ordinary waste-burning equipment, a marine incinerator operates under defined combustion, safety and emission-control requirements and uses dedicated interlocks and burner controls. The model designation identifies a particular manufacturer configuration, but the supplied record does not define every hardware, material, control, or certification difference to adjacent models. For exact ratings, dimensions, settings, materials, connection details, and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect refractory, chamber surfaces, burners, air fans, dampers, waste and sludge feed, exhaust path and safety interlocks. Check for ash accumulation, leakage and abnormal shell hot spots. Verify flame-failure and temperature protections according to the approved test routine. Waste acceptance, operating temperatures and statutory limits must follow the vessel's approved documentation.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →