Incinerator (IMO MEPC.244) · Incinerator
TeamTec OG-LS-200 is a shipboard waste incinerator listed for marine waste-burning service listed in the supplied equipment record. It is normally installed in a dedicated machinery or incinerator space with fuel, combustion-air, exhaust and waste-handling connections. Its primary purpose is to reduce approved shipboard combustible waste and sludge in a controlled combustion chamber. Compared with ordinary waste-burning equipment, a marine incinerator operates under defined combustion, safety and emission-control requirements and uses dedicated interlocks and burner controls. The model designation identifies a particular manufacturer configuration, but the supplied record does not define every hardware, material, control, or certification difference to adjacent models. For exact ratings, dimensions, settings, materials, connection details, and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, TeamTec first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect refractory, chamber surfaces, burners, air fans, dampers, waste and sludge feed, exhaust path and safety interlocks. Check for ash accumulation, leakage and abnormal shell hot spots. Verify flame-failure and temperature protections according to the approved test routine. Waste acceptance, operating temperatures and statutory limits must follow the vessel's approved documentation.
Carry burner nozzles, ignition components, flame detectors, temperature sensors, fan and damper service parts, refractory repair materials approved for the unit, seals, gaskets and selected control relays.
Free of charge — we forward your request to qualified suppliers for TeamTec equipment from our network of over 114,000 maritime companies.
Tell us what you need for this TeamTec OG-LS-200 — a part, a service call, a second opinion. Are you TeamTec? Claim this brand page.
Service engineer? Write the day report for this OG-LS-200 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.