Oil Mist Detector · Oil Mist Detection
Schaller Automation Visatron VN215-II 12ch — Oil Mist Detection. As an Oil Mist Detector, it is normally installed on a large diesel engine with detector or sampling points connected to crankcase compartments and an alarm unit. In that role, its primary purpose is to warn of abnormal oil-mist formation that can precede a crankcase hot spot or explosion. Unlike ordinary temperature monitoring, oil-mist detection responds to aerosol concentration and is sensitive to sampling cleanliness, optical condition and engine compartment balance. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect sampling pipes, detector chamber, optics, filters, fan or pump where fitted, drains and alarm interfaces. Keep sample passages clean and investigate repeated channel deviations rather than simply resetting alarms. Function-test alarms under the approved procedure. Refer to the manufacturer and engine documentation for the exact figure for alarm levels and calibration methods.
Carry filters, seals, cleaning materials, sampling-line fittings, fan or pump service parts, fuses and supported sensor or electronic modules.
Free of charge — send us your request for Schaller Automation equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Schaller Automation first.
Tell us what you need for this Schaller Automation Visatron VN215-II 12ch — a part, a service call, a second opinion. Are you Schaller Automation? Claim this brand page.
Service engineer? Write the day report for this Visatron VN215-II 12ch in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.