Online Vibration Monitor · Vibration Monitoring
SKF SKF Multilog IMx-32 is listed as a Online Vibration Monitor within the Vibration Monitoring category. It is typically installed on rotating machinery sensors or as portable condition-monitoring equipment used throughout the machinery spaces. Its engineering role is to detect changes in vibration that can indicate imbalance, misalignment, bearing damage or other developing machinery faults. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, SKF first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect sensor mounting, cable routing, connectors and data quality and compare trends at consistent operating conditions. Verify calibration status and investigate step changes before relying on alarm thresholds. Exact alert and danger limits must be based on the machinery, class and manufacturer documentation rather than assumed values.
Carry compatible sensors, magnetic or stud mounting accessories as applicable, cables, connectors, batteries and maker-recommended acquisition-module parts.
Free of charge — we forward your request to qualified suppliers for SKF equipment from our network of over 114,000 maritime companies.
Tell us what you need for this SKF Multilog IMx-32 — a part, a service call, a second opinion. Are you SKF? Claim this brand page.
Service engineer? Write the day report for this Multilog IMx-32 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.