"> Heinen & Hopman Heinen & Hopman Titan AHU-40
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Heinen & Hopman

Heinen & Hopman Titan AHU-40

Heinen & Hopman Heinen & Hopman Titan AHU-40 is listed as a AHU (Air Handling Unit) within the Air Conditioning category. It is typically installed in an HVAC machinery room, fan room or accommodation technical space, connected to chilled-water, refrigerant, air and electrical/control services as applicable. Its engineering role is to cool, heat or condition shipboard air for accommodation, control rooms and other temperature-sensitive spaces. The source entry additionally records power 40.0 kW, capacity 20000 m³/h. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.

40.0 kW
Power
20000 m³/h
Capacity

Components & Design

Component data being added…

Technical Data

system type marine HVAC
capacity 20000 m³/h

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Heat-exchanger fouling or restricted airflow/water flow can reduce capacity, seen as poor space temperature control or abnormal approach temperatures
Refrigerant leakage or circuit faults can reduce cooling performance, noticed as low capacity, trips or abnormal operating pressures
Compressor, fan or pump wear can cause vibration, noise or protective shutdowns
Sensor, thermostat or controller faults can produce unstable temperature control or nuisance alarms
Blocked filters, drains or condensate lines can cause poor airflow, water carryover or leakage

Service & Maintenance

Inspect filters, coils or heat exchangers, fans, compressors or pumps, drains, valves, sensors and control functions according to the unit type. Trend temperatures and pressures where provided and check for leakage, corrosion and abnormal vibration. Refrigerant charge, pressure limits and protective settings must follow the manufacturer documentation for the exact figure.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry filters, belts where fitted, seals, sensors, contactors/fuses and manufacturer-recommended refrigeration or fan service parts.
Equipment Model #68546 · ✓ still in production