Becker Flap Rudder FR
Becker Marine Becker Flap Rudder FR is a marine steering-gear system listed in the supplied equipment record. It is normally installed in the steering-gear compartment at the aft end of the vessel, mechanically connected to the rudder stock or steering actuator. Its primary purpose is to move and hold the rudder in response to bridge steering commands. Compared with propulsion-control equipment, steering gear directly produces rudder movement and includes dedicated hydraulic, electrical, control and emergency arrangements. The model designation identifies a particular manufacturer configuration, but the supplied record does not define every hardware, material, control, or certification difference to adjacent models. For exact ratings, dimensions, settings, materials, connection details, and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Service & Maintenance
Inspect hydraulic power units, oil level and condition, pumps, rams or rotary actuators, piping, relief devices, controls, feedback transmitters and structural connections. Test main and alternative steering arrangements, alarms, changeover and emergency operation according to class requirements. Check for leakage and abnormal movement throughout the rudder range. Exact pressure and wear limits require approved documentation.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →