HiMSEN 6H32/40
Hyundai HiMSEN H32/40 — Marinediesel, Bohrung 320 x Hub 400 mm, 720/750 rpm, 3000–10000 kW (in-line: 3000–4500 kW; V-type: 6000–10000 kW). Brennstoff: Diesel, Heavy Fuel Oil (HFO) up to 700 cSt at 50°C. Status: Production (Type Approval Test completed, in service). Verifiziert, Datenblatt verlinkt.
Engine Specifications
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Inspect turbocharger for fouling/contamination; clean if necessary when high exhaust gas temperatures detected; check fuel quality for excessive sulfur content
Check Fuel Pump Rack Index for even distribution; verify Maximum Firing Pressure and injection timing; inspect fuel injectors and intake/exhaust valve condition
Inspect piston rings for damage/breakage; measure ring groove clearances; verify correct cylinder oil grade (BN balance); check for lacquering on cylinder liner surface
Measure liner bore diameter at multiple points; inspect for scratches/burrs; verify crosshatch honing pattern; confirm correct lubricant viscosity and additives per specifications
Test fuel injectors with injection tester; check nozzle spray pattern; verify fuel quality and separator function; inspect nozzle tip for coke deposits
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →