General Welding Consumables · Welding Consumables
NIPPON STEEL WELDING & ENGINEERING CO.,LTD., Narashino Plant (Japan) holds DNV Type Approval certificate TAW000033B for SX-3 / C1 / SB-41, issued 2022-09-07 by DNV SE. Such sets combine a flux cored wire, a shielding gas and a backing material for one-sided joints. The register classifies the product as a flux cored wire/gas/backing combination within the category Welding Consumables, and the certificate is valid until 2027-07-19.
Flux cored wire, gas and backing combinations of this kind are typically used for one-sided gas-shielded welding of butt joints, where a backing material supports the root side of the weld.
Verified against the DNV Approval Finder — the certificate below is issued by DNV, not by us.
Free of charge — send us your request for NIPPON STEEL WELDING & ENGINEERING CO.,LTD., Narashino Plant equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, NIPPON STEEL WELDING & ENGINEERING CO.,LTD., Narashino Plant first.
Tell us what you need for this NIPPON STEEL WELDING & ENGINEERING CO.,LTD., Narashino Plant SX-3 / C1 / SB-41 — a part, a service call, a second opinion. Are you NIPPON STEEL WELDING & ENGINEERING CO.,LTD., Narashino Plant? Claim this brand page.
Service engineer? Write the day report for this SX-3 / C1 / SB-41 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.