General Welding Consumables · Welding Consumables
Kyung Eun Ceramics Co., Ltd. of the Republic of Korea holds DNV SE Type Approval certificate TAW00003MU for H-14 / CW / S-707T / KEI-107G, issued on 2023-04-25 and valid until 2028-03-13. Combinations of wire, cut wire, flux and backing are typically used together in flux-based welding of steel plate. DNV classifies the product as Wire/Cut Wire/Flux/Backing combination in the category Welding Consumables.
Wire, flux and backing combinations of this kind are typically used for welding steel plates in shipyards, such as in panel and hull block fabrication.
Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.
Free of charge — send us your request for Kyung Eun Ceramics Co., Ltd. equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Kyung Eun Ceramics Co., Ltd. first.
Tell us what you need for this Kyung Eun Ceramics Co., Ltd. H-14 / CW / S-707T / KEI-107G — a part, a service call, a second opinion. Are you Kyung Eun Ceramics Co., Ltd.? Claim this brand page.
Service engineer? Write the day report for this H-14 / CW / S-707T / KEI-107G in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.